example of discussion research paper

• Research Process
• Manuscript Preparation
• Manuscript Review
• Publication Process
• Publication Recognition
• Language Editing Services
• Translation Services

6 Steps to Write an Excellent Discussion in Your Manuscript

• 4 minute read
• 27.2K views

Table of Contents

The discussion section in scientific manuscripts might be the last few paragraphs, but its role goes far beyond wrapping up. It’s the part of an article where scientists talk about what they found and what it means, where raw data turns into meaningful insights. Therefore, discussion is a vital component of the article.  

An excellent discussion is well-organized. We bring to you authors a classic 6-step method for writing discussion sections, with examples to illustrate the functions and specific writing logic of each step. Take a look at how you can impress journal reviewers with a concise and focused discussion section!  

Discussion frame structure   

Conventionally, a discussion section has three parts: an introductory paragraph, a few intermediate paragraphs, and a conclusion¹.  Please follow the steps below:  

1.Introduction—mention gaps in previous research¹⁻ ²

Here, you orient the reader to your study. In the first paragraph, it is advisable to mention the research gap your paper addresses.  

Example: This study investigated the cognitive effects of a meat-only diet on adults. While earlier studies have explored the impact of a carnivorous diet on physical attributes and agility, they have not explicitly addressed its influence on cognitively intense tasks involving memory and reasoning.  

2. Summarizing key findings—let your data speak ¹⁻ ²

After you have laid out the context for your study, recapitulate some of its key findings. Also, highlight key data and evidence supporting these findings.  

Example: We found that risk-taking behavior among teenagers correlates with their tendency to invest in cryptocurrencies. Risk takers in this study, as measured by the Cambridge Gambling Task, tended to have an inordinately higher proportion of their savings invested as crypto coins.  

3. Interpreting results—compare with other papers¹⁻²    

Here, you must analyze and interpret any results concerning the research question or hypothesis. How do the key findings of your study help verify or disprove the hypothesis? What practical relevance does your discovery have?  

Example: Our study suggests that higher daily caffeine intake is not associated with poor performance in major sporting events. Athletes may benefit from the cardiovascular benefits of daily caffeine intake without adversely impacting performance.    

Remember, unlike the results section, the discussion ideally focuses on locating your findings in the larger body of existing research. Hence, compare your results with those of other peer-reviewed papers.  

Example: Although Miller et al. (2020) found evidence of such political bias in a multicultural population, our findings suggest that the bias is weak or virtually non-existent among politically active citizens.  

4. Addressing limitations—their potential impact on the results¹⁻²    

Discuss the potential impact of limitations on the results. Most studies have limitations, and it is crucial to acknowledge them in the intermediary paragraphs of the discussion section. Limitations may include low sample size, suspected interference or noise in data, low effect size, etc.  

Example: This study explored a comprehensive list of adverse effects associated with the novel drug ‘X’. However, long-term studies may be needed to confirm its safety, especially regarding major cardiac events.  

5. Implications for future research—how to explore further¹⁻²    

Locate areas of your research where more investigation is needed. Concluding paragraphs of the discussion can explain what research will likely confirm your results or identify knowledge gaps your study left unaddressed.  

Example: Our study demonstrates that roads paved with the plastic-infused compound ‘Y’ are more resilient than asphalt. Future studies may explore economically feasible ways of producing compound Y in bulk.  

6. Conclusion—summarize content¹⁻²    

A good way to wind up the discussion section is by revisiting the research question mentioned in your introduction. Sign off by expressing the main findings of your study.  

Example: Recent observations suggest that the fish ‘Z’ is moving upriver in many parts of the Amazon basin. Our findings provide conclusive evidence that this phenomenon is associated with rising sea levels and climate change, not due to elevated numbers of invasive predators.  

A rigorous and concise discussion section is one of the keys to achieving an excellent paper. It serves as a critical platform for researchers to interpret and connect their findings with the broader scientific context. By detailing the results, carefully comparing them with existing research, and explaining the limitations of this study, you can effectively help reviewers and readers understand the entire research article more comprehensively and deeply¹⁻² , thereby helping your manuscript to be successfully published and gain wider dissemination.  

In addition to keeping this writing guide, you can also use Elsevier Language Services to improve the quality of your paper more deeply and comprehensively. We have a professional editing team covering multiple disciplines. With our profound disciplinary background and rich polishing experience, we can significantly optimize all paper modules including the discussion, effectively improve the fluency and rigor of your articles, and make your scientific research results consistent, with its value reflected more clearly. We are always committed to ensuring the quality of papers according to the standards of top journals, improving the publishing efficiency of scientific researchers, and helping you on the road to academic success. Check us out here !  

Type in wordcount for Standard Total: USD EUR JPY Follow this link if your manuscript is longer than 12,000 words. Upload  

References:   

• Masic, I. (2018). How to write an efficient discussion? Medical Archives , 72(3), 306. https://doi.org/10.5455/medarh.2018.72.306-307  
• Şanlı, Ö., Erdem, S., & Tefik, T. (2014). How to write a discussion section? Urology Research & Practice , 39(1), 20–24. https://doi.org/10.5152/tud.2013.049  

Navigating “Chinglish” Errors in Academic English Writing

A Guide to Crafting Shorter, Impactful Sentences in Academic Writing

You may also like.

Submission 101: What format should be used for academic papers?

Page-Turner Articles are More Than Just Good Arguments: Be Mindful of Tone and Structure!

A Must-see for Researchers! How to Ensure Inclusivity in Your Scientific Writing

Make Hook, Line, and Sinker: The Art of Crafting Engaging Introductions

Can Describing Study Limitations Improve the Quality of Your Paper?

How to Write Clear and Crisp Civil Engineering Papers? Here are 5 Key Tips to Consider

The Clear Path to An Impactful Paper: ②

Input your search keywords and press Enter.

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write a Discussion Section for a Research Paper

We’ve talked about several useful writing tips that authors should consider while drafting or editing their research papers. In particular, we’ve focused on  figures and legends , as well as the Introduction ,  Methods , and  Results . Now that we’ve addressed the more technical portions of your journal manuscript, let’s turn to the analytical segments of your research article. In this article, we’ll provide tips on how to write a strong Discussion section that best portrays the significance of your research contributions.

What is the Discussion section of a research paper?

In a nutshell,  your Discussion fulfills the promise you made to readers in your Introduction . At the beginning of your paper, you tell us why we should care about your research. You then guide us through a series of intricate images and graphs that capture all the relevant data you collected during your research. We may be dazzled and impressed at first, but none of that matters if you deliver an anti-climactic conclusion in the Discussion section!

Are you feeling pressured? Don’t worry. To be honest, you will edit the Discussion section of your manuscript numerous times. After all, in as little as one to two paragraphs ( Nature ‘s suggestion  based on their 3,000-word main body text limit), you have to explain how your research moves us from point A (issues you raise in the Introduction) to point B (our new understanding of these matters). You must also recommend how we might get to point C (i.e., identify what you think is the next direction for research in this field). That’s a lot to say in two paragraphs!

So, how do you do that? Let’s take a closer look.

What should I include in the Discussion section?

As we stated above, the goal of your Discussion section is to  answer the questions you raise in your Introduction by using the results you collected during your research . The content you include in the Discussions segment should include the following information:

• Remind us why we should be interested in this research project.
• Describe the nature of the knowledge gap you were trying to fill using the results of your study.
• Don’t repeat your Introduction. Instead, focus on why  this  particular study was needed to fill the gap you noticed and why that gap needed filling in the first place.
• Mainly, you want to remind us of how your research will increase our knowledge base and inspire others to conduct further research.
• Clearly tell us what that piece of missing knowledge was.
• Answer each of the questions you asked in your Introduction and explain how your results support those conclusions.
• Make sure to factor in all results relevant to the questions (even if those results were not statistically significant).
• Focus on the significance of the most noteworthy results.
• If conflicting inferences can be drawn from your results, evaluate the merits of all of them.
• Don’t rehash what you said earlier in the Results section. Rather, discuss your findings in the context of answering your hypothesis. Instead of making statements like “[The first result] was this…,” say, “[The first result] suggests [conclusion].”
• Do your conclusions line up with existing literature?
• Discuss whether your findings agree with current knowledge and expectations.
• Keep in mind good persuasive argument skills, such as explaining the strengths of your arguments and highlighting the weaknesses of contrary opinions.
• If you discovered something unexpected, offer reasons. If your conclusions aren’t aligned with current literature, explain.
• Address any limitations of your study and how relevant they are to interpreting your results and validating your findings.
• Make sure to acknowledge any weaknesses in your conclusions and suggest room for further research concerning that aspect of your analysis.
• Make sure your suggestions aren’t ones that should have been conducted during your research! Doing so might raise questions about your initial research design and protocols.
• Similarly, maintain a critical but unapologetic tone. You want to instill confidence in your readers that you have thoroughly examined your results and have objectively assessed them in a way that would benefit the scientific community’s desire to expand our knowledge base.
• Recommend next steps.
• Your suggestions should inspire other researchers to conduct follow-up studies to build upon the knowledge you have shared with them.
• Keep the list short (no more than two).

How to Write the Discussion Section

The above list of what to include in the Discussion section gives an overall idea of what you need to focus on throughout the section. Below are some tips and general suggestions about the technical aspects of writing and organization that you might find useful as you draft or revise the contents we’ve outlined above.

Technical writing elements

• Embrace active voice because it eliminates the awkward phrasing and wordiness that accompanies passive voice.
• Use the present tense, which should also be employed in the Introduction.
• Sprinkle with first person pronouns if needed, but generally, avoid it. We want to focus on your findings.
• Maintain an objective and analytical tone.

Discussion section organization

• Keep the same flow across the Results, Methods, and Discussion sections.
• We develop a rhythm as we read and parallel structures facilitate our comprehension. When you organize information the same way in each of these related parts of your journal manuscript, we can quickly see how a certain result was interpreted and quickly verify the particular methods used to produce that result.
• Notice how using parallel structure will eliminate extra narration in the Discussion part since we can anticipate the flow of your ideas based on what we read in the Results segment. Reducing wordiness is important when you only have a few paragraphs to devote to the Discussion section!
• Within each subpart of a Discussion, the information should flow as follows: (A) conclusion first, (B) relevant results and how they relate to that conclusion and (C) relevant literature.
• End with a concise summary explaining the big-picture impact of your study on our understanding of the subject matter. At the beginning of your Discussion section, you stated why  this  particular study was needed to fill the gap you noticed and why that gap needed filling in the first place. Now, it is time to end with “how your research filled that gap.”

Discussion Part 1: Summarizing Key Findings

Begin the Discussion section by restating your  statement of the problem  and briefly summarizing the major results. Do not simply repeat your findings. Rather, try to create a concise statement of the main results that directly answer the central research question that you stated in the Introduction section . This content should not be longer than one paragraph in length.

Many researchers struggle with understanding the precise differences between a Discussion section and a Results section . The most important thing to remember here is that your Discussion section should subjectively evaluate the findings presented in the Results section, and in relatively the same order. Keep these sections distinct by making sure that you do not repeat the findings without providing an interpretation.

Phrase examples: Summarizing the results

• The findings indicate that …
• These results suggest a correlation between A and B …
• The data present here suggest that …
• An interpretation of the findings reveals a connection between…

Discussion Part 2: Interpreting the Findings

What do the results mean? It may seem obvious to you, but simply looking at the figures in the Results section will not necessarily convey to readers the importance of the findings in answering your research questions.

The exact structure of interpretations depends on the type of research being conducted. Here are some common approaches to interpreting data:

• Identifying correlations and relationships in the findings
• Explaining whether the results confirm or undermine your research hypothesis
• Giving the findings context within the history of similar research studies
• Discussing unexpected results and analyzing their significance to your study or general research
• Offering alternative explanations and arguing for your position

Organize the Discussion section around key arguments, themes, hypotheses, or research questions or problems. Again, make sure to follow the same order as you did in the Results section.

Discussion Part 3: Discussing the Implications

In addition to providing your own interpretations, show how your results fit into the wider scholarly literature you surveyed in the  literature review section. This section is called the implications of the study . Show where and how these results fit into existing knowledge, what additional insights they contribute, and any possible consequences that might arise from this knowledge, both in the specific research topic and in the wider scientific domain.

Questions to ask yourself when dealing with potential implications:

• Do your findings fall in line with existing theories, or do they challenge these theories or findings? What new information do they contribute to the literature, if any? How exactly do these findings impact or conflict with existing theories or models?
• What are the practical implications on actual subjects or demographics?
• What are the methodological implications for similar studies conducted either in the past or future?

Your purpose in giving the implications is to spell out exactly what your study has contributed and why researchers and other readers should be interested.

Phrase examples: Discussing the implications of the research

• These results confirm the existing evidence in X studies…
• The results are not in line with the foregoing theory that…
• This experiment provides new insights into the connection between…
• These findings present a more nuanced understanding of…
• While previous studies have focused on X, these results demonstrate that Y.

Step 4: Acknowledging the limitations

All research has study limitations of one sort or another. Acknowledging limitations in methodology or approach helps strengthen your credibility as a researcher. Study limitations are not simply a list of mistakes made in the study. Rather, limitations help provide a more detailed picture of what can or cannot be concluded from your findings. In essence, they help temper and qualify the study implications you listed previously.

Study limitations can relate to research design, specific methodological or material choices, or unexpected issues that emerged while you conducted the research. Mention only those limitations directly relate to your research questions, and explain what impact these limitations had on how your study was conducted and the validity of any interpretations.

Possible types of study limitations:

• Insufficient sample size for statistical measurements
• Lack of previous research studies on the topic
• Methods/instruments/techniques used to collect the data
• Limited access to data
• Time constraints in properly preparing and executing the study

After discussing the study limitations, you can also stress that your results are still valid. Give some specific reasons why the limitations do not necessarily handicap your study or narrow its scope.

Phrase examples: Limitations sentence beginners

• “There may be some possible limitations in this study.”
• “The findings of this study have to be seen in light of some limitations.”
•  “The first limitation is the…The second limitation concerns the…”
•  “The empirical results reported herein should be considered in the light of some limitations.”
• “This research, however, is subject to several limitations.”
• “The primary limitation to the generalization of these results is…”
• “Nonetheless, these results must be interpreted with caution and a number of limitations should be borne in mind.”

Discussion Part 5: Giving Recommendations for Further Research

Based on your interpretation and discussion of the findings, your recommendations can include practical changes to the study or specific further research to be conducted to clarify the research questions. Recommendations are often listed in a separate Conclusion section , but often this is just the final paragraph of the Discussion section.

Suggestions for further research often stem directly from the limitations outlined. Rather than simply stating that “further research should be conducted,” provide concrete specifics for how future can help answer questions that your research could not.

Phrase examples: Recommendation sentence beginners

• Further research is needed to establish …
• There is abundant space for further progress in analyzing…
• A further study with more focus on X should be done to investigate…
• Further studies of X that account for these variables must be undertaken.

Consider Receiving Professional Language Editing

As you edit or draft your research manuscript, we hope that you implement these guidelines to produce a more effective Discussion section. And after completing your draft, don’t forget to submit your work to a professional proofreading and English editing service like Wordvice, including our manuscript editing service for  paper editing , cover letter editing , SOP editing , and personal statement proofreading services. Language editors not only proofread and correct errors in grammar, punctuation, mechanics, and formatting but also improve terms and revise phrases so they read more naturally. Wordvice is an industry leader in providing high-quality revision for all types of academic documents.

For additional information about how to write a strong research paper, make sure to check out our full  research writing series !

Wordvice Writing Resources

• How to Write a Research Paper Introduction 
• Which Verb Tenses to Use in a Research Paper
• How to Write an Abstract for a Research Paper
• How to Write a Research Paper Title
• Useful Phrases for Academic Writing
• Common Transition Terms in Academic Papers
• Active and Passive Voice in Research Papers
• 100+ Verbs That Will Make Your Research Writing Amazing
• Tips for Paraphrasing in Research Papers

Additional Academic Resources

•   Guide for Authors.  (Elsevier)
•  How to Write the Results Section of a Research Paper.  (Bates College)
•   Structure of a Research Paper.  (University of Minnesota Biomedical Library)
•   How to Choose a Target Journal  (Springer)
•   How to Write Figures and Tables  (UNC Writing Center)

How To Write The Discussion Chapter

A Simple Explainer With Examples + Free Template

By: Jenna Crossley (PhD) | Reviewed By: Dr. Eunice Rautenbach | August 2021

If you’re reading this, chances are you’ve reached the discussion chapter of your thesis or dissertation and are looking for a bit of guidance. Well, you’ve come to the right place ! In this post, we’ll unpack and demystify the typical discussion chapter in straightforward, easy to understand language, with loads of examples .

Overview: The Discussion Chapter

• What  the discussion chapter is
• What to include in your discussion
• How to write up your discussion
• A few tips and tricks to help you along the way
• Free discussion template

What (exactly) is the discussion chapter?

The discussion chapter is where you interpret and explain your results within your thesis or dissertation. This contrasts with the results chapter, where you merely present and describe the analysis findings (whether qualitative or quantitative ). In the discussion chapter, you elaborate on and evaluate your research findings, and discuss the significance and implications of your results .

In this chapter, you’ll situate your research findings in terms of your research questions or hypotheses and tie them back to previous studies and literature (which you would have covered in your literature review chapter). You’ll also have a look at how relevant and/or significant your findings are to your field of research, and you’ll argue for the conclusions that you draw from your analysis. Simply put, the discussion chapter is there for you to interact with and explain your research findings in a thorough and coherent manner.

What should I include in the discussion chapter?

First things first: in some studies, the results and discussion chapter are combined into one chapter .  This depends on the type of study you conducted (i.e., the nature of the study and methodology adopted), as well as the standards set by the university.  So, check in with your university regarding their norms and expectations before getting started. In this post, we’ll treat the two chapters as separate, as this is most common.

Basically, your discussion chapter should analyse , explore the meaning and identify the importance of the data you presented in your results chapter. In the discussion chapter, you’ll give your results some form of meaning by evaluating and interpreting them. This will help answer your research questions, achieve your research aims and support your overall conclusion (s). Therefore, you discussion chapter should focus on findings that are directly connected to your research aims and questions. Don’t waste precious time and word count on findings that are not central to the purpose of your research project.

As this chapter is a reflection of your results chapter, it’s vital that you don’t report any new findings . In other words, you can’t present claims here if you didn’t present the relevant data in the results chapter first.  So, make sure that for every discussion point you raise in this chapter, you’ve covered the respective data analysis in the results chapter. If you haven’t, you’ll need to go back and adjust your results chapter accordingly.

If you’re struggling to get started, try writing down a bullet point list everything you found in your results chapter. From this, you can make a list of everything you need to cover in your discussion chapter. Also, make sure you revisit your research questions or hypotheses and incorporate the relevant discussion to address these.  This will also help you to see how you can structure your chapter logically.

Need a helping hand?

How to write the discussion chapter

Now that you’ve got a clear idea of what the discussion chapter is and what it needs to include, let’s look at how you can go about structuring this critically important chapter. Broadly speaking, there are six core components that need to be included, and these can be treated as steps in the chapter writing process.

Step 1: Restate your research problem and research questions

The first step in writing up your discussion chapter is to remind your reader of your research problem , as well as your research aim(s) and research questions . If you have hypotheses, you can also briefly mention these. This “reminder” is very important because, after reading dozens of pages, the reader may have forgotten the original point of your research or been swayed in another direction. It’s also likely that some readers skip straight to your discussion chapter from the introduction chapter , so make sure that your research aims and research questions are clear.

Step 2: Summarise your key findings

Next, you’ll want to summarise your key findings from your results chapter. This may look different for qualitative and quantitative research , where qualitative research may report on themes and relationships, whereas quantitative research may touch on correlations and causal relationships. Regardless of the methodology, in this section you need to highlight the overall key findings in relation to your research questions.

Typically, this section only requires one or two paragraphs , depending on how many research questions you have. Aim to be concise here, as you will unpack these findings in more detail later in the chapter. For now, a few lines that directly address your research questions are all that you need.

Some examples of the kind of language you’d use here include:

• The data suggest that…
• The data support/oppose the theory that…
• The analysis identifies…

These are purely examples. What you present here will be completely dependent on your original research questions, so make sure that you are led by them .

Step 3: Interpret your results

Once you’ve restated your research problem and research question(s) and briefly presented your key findings, you can unpack your findings by interpreting your results. Remember: only include what you reported in your results section – don’t introduce new information.

From a structural perspective, it can be a wise approach to follow a similar structure in this chapter as you did in your results chapter. This would help improve readability and make it easier for your reader to follow your arguments. For example, if you structured you results discussion by qualitative themes, it may make sense to do the same here.

Alternatively, you may structure this chapter by research questions, or based on an overarching theoretical framework that your study revolved around. Every study is different, so you’ll need to assess what structure works best for you.

When interpreting your results, you’ll want to assess how your findings compare to those of the existing research (from your literature review chapter). Even if your findings contrast with the existing research, you need to include these in your discussion. In fact, those contrasts are often the most interesting findings . In this case, you’d want to think about why you didn’t find what you were expecting in your data and what the significance of this contrast is.

Here are a few questions to help guide your discussion:

• How do your results relate with those of previous studies ?
• If you get results that differ from those of previous studies, why may this be the case?
• What do your results contribute to your field of research?
• What other explanations could there be for your findings?

When interpreting your findings, be careful not to draw conclusions that aren’t substantiated . Every claim you make needs to be backed up with evidence or findings from the data (and that data needs to be presented in the previous chapter – results). This can look different for different studies; qualitative data may require quotes as evidence, whereas quantitative data would use statistical methods and tests. Whatever the case, every claim you make needs to be strongly backed up.

Step 4: Acknowledge the limitations of your study

The fourth step in writing up your discussion chapter is to acknowledge the limitations of the study. These limitations can cover any part of your study , from the scope or theoretical basis to the analysis method(s) or sample. For example, you may find that you collected data from a very small sample with unique characteristics, which would mean that you are unable to generalise your results to the broader population.

For some students, discussing the limitations of their work can feel a little bit self-defeating . This is a misconception, as a core indicator of high-quality research is its ability to accurately identify its weaknesses. In other words, accurately stating the limitations of your work is a strength, not a weakness . All that said, be careful not to undermine your own research. Tell the reader what limitations exist and what improvements could be made, but also remind them of the value of your study despite its limitations.

Step 5: Make recommendations for implementation and future research

Now that you’ve unpacked your findings and acknowledge the limitations thereof, the next thing you’ll need to do is reflect on your study in terms of two factors:

• The practical application of your findings
• Suggestions for future research

The first thing to discuss is how your findings can be used in the real world – in other words, what contribution can they make to the field or industry? Where are these contributions applicable, how and why? For example, if your research is on communication in health settings, in what ways can your findings be applied to the context of a hospital or medical clinic? Make sure that you spell this out for your reader in practical terms, but also be realistic and make sure that any applications are feasible.

The next discussion point is the opportunity for future research . In other words, how can other studies build on what you’ve found and also improve the findings by overcoming some of the limitations in your study (which you discussed a little earlier). In doing this, you’ll want to investigate whether your results fit in with findings of previous research, and if not, why this may be the case. For example, are there any factors that you didn’t consider in your study? What future research can be done to remedy this? When you write up your suggestions, make sure that you don’t just say that more research is needed on the topic, also comment on how the research can build on your study.

Step 6: Provide a concluding summary

Finally, you’ve reached your final stretch. In this section, you’ll want to provide a brief recap of the key findings – in other words, the findings that directly address your research questions . Basically, your conclusion should tell the reader what your study has found, and what they need to take away from reading your report.

When writing up your concluding summary, bear in mind that some readers may skip straight to this section from the beginning of the chapter.  So, make sure that this section flows well from and has a strong connection to the opening section of the chapter.

Tips and tricks for an A-grade discussion chapter

Now that you know what the discussion chapter is , what to include and exclude , and how to structure it , here are some tips and suggestions to help you craft a quality discussion chapter.

• When you write up your discussion chapter, make sure that you keep it consistent with your introduction chapter , as some readers will skip from the introduction chapter directly to the discussion chapter. Your discussion should use the same tense as your introduction, and it should also make use of the same key terms.
• Don’t make assumptions about your readers. As a writer, you have hands-on experience with the data and so it can be easy to present it in an over-simplified manner. Make sure that you spell out your findings and interpretations for the intelligent layman.
• Have a look at other theses and dissertations from your institution, especially the discussion sections. This will help you to understand the standards and conventions of your university, and you’ll also get a good idea of how others have structured their discussion chapters. You can also check out our chapter template .
• Avoid using absolute terms such as “These results prove that…”, rather make use of terms such as “suggest” or “indicate”, where you could say, “These results suggest that…” or “These results indicate…”. It is highly unlikely that a dissertation or thesis will scientifically prove something (due to a variety of resource constraints), so be humble in your language.
• Use well-structured and consistently formatted headings to ensure that your reader can easily navigate between sections, and so that your chapter flows logically and coherently.

If you have any questions or thoughts regarding this post, feel free to leave a comment below. Also, if you’re looking for one-on-one help with your discussion chapter (or thesis in general), consider booking a free consultation with one of our highly experienced Grad Coaches to discuss how we can help you.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

38 Comments

Thank you this is helpful!

This is very helpful to me… Thanks a lot for sharing this with us 😊

This has been very helpful indeed. Thank you.

This is actually really helpful, I just stumbled upon it. Very happy that I found it, thank you.

Me too! I was kinda lost on how to approach my discussion chapter. How helpful! Thanks a lot!

This is really good and explicit. Thanks

Thank you, this blog has been such a help.

Thank you. This is very helpful.

Dear sir/madame

Thanks a lot for this helpful blog. Really, it supported me in writing my discussion chapter while I was totally unaware about its structure and method of writing.

With regards

Syed Firoz Ahmad PhD, Research Scholar

I agree so much. This blog was god sent. It assisted me so much while I was totally clueless about the context and the know-how. Now I am fully aware of what I am to do and how I am to do it.

Thanks! This is helpful!

thanks alot for this informative website

Dear Sir/Madam,

Truly, your article was much benefited when i structured my discussion chapter.

Thank you very much!!!

This is helpful for me in writing my research discussion component. I have to copy this text on Microsoft word cause of my weakness that I cannot be able to read the text on screen a long time. So many thanks for this articles.

This was helpful

Thanks Jenna, well explained.

Thank you! This is super helpful.

Thanks very much. I have appreciated the six steps on writing the Discussion chapter which are (i) Restating the research problem and questions (ii) Summarising the key findings (iii) Interpreting the results linked to relating to previous results in positive and negative ways; explaining whay different or same and contribution to field of research and expalnation of findings (iv) Acknowledgeing limitations (v) Recommendations for implementation and future resaerch and finally (vi) Providing a conscluding summary

My two questions are: 1. On step 1 and 2 can it be the overall or you restate and sumamrise on each findings based on the reaerch question? 2. On 4 and 5 do you do the acknowlledgement , recommendations on each research finding or overall. This is not clear from your expalanattion.

Please respond.

This post is very useful. I’m wondering whether practical implications must be introduced in the Discussion section or in the Conclusion section?

This is very instructive and educative

Sigh, I never knew a 20 min video could have literally save my life like this. I found this at the right time!!!! Everything I need to know in one video thanks a mil ! OMGG and that 6 step!!!!!! was the cherry on top the cake!!!!!!!!!

Thanks alot.., I have gained much

This piece is very helpful on how to go about my discussion section. I can always recommend GradCoach research guides for colleagues.

Many thanks for this resource. It has been very helpful to me. I was finding it hard to even write the first sentence. Much appreciated.

Thanks so much. Very helpful to know what is included in the discussion section

this was a very helpful and useful information

This is very helpful. Very very helpful. Thanks for sharing this online!

it is very helpfull article, and i will recommend it to my fellow students. Thank you.

Superlative! More grease to your elbows.

Powerful, thank you for sharing.

Wow! Just wow! God bless the day I stumbled upon you guys’ YouTube videos! It’s been truly life changing and anxiety about my report that is due in less than a month has subsided significantly!

Simplified explanation. Well done.

The presentation is enlightening. Thank you very much.

Thanks for the support and guidance

This has been a great help to me and thank you do much

I second that “it is highly unlikely that a dissertation or thesis will scientifically prove something”; although, could you enlighten us on that comment and elaborate more please?

Sure, no problem.

Scientific proof is generally considered a very strong assertion that something is definitively and universally true. In most scientific disciplines, especially within the realms of natural and social sciences, absolute proof is very rare. Instead, researchers aim to provide evidence that supports or rejects hypotheses. This evidence increases or decreases the likelihood that a particular theory is correct, but it rarely proves something in the absolute sense.

Dissertations and theses, as substantial as they are, typically focus on exploring a specific question or problem within a larger field of study. They contribute to a broader conversation and body of knowledge. The aim is often to provide detailed insight, extend understanding, and suggest directions for further research rather than to offer definitive proof. These academic works are part of a cumulative process of knowledge building where each piece of research connects with others to gradually enhance our understanding of complex phenomena.

Furthermore, the rigorous nature of scientific inquiry involves continuous testing, validation, and potential refutation of ideas. What might be considered a “proof” at one point can later be challenged by new evidence or alternative interpretations. Therefore, the language of “proof” is cautiously used in academic circles to maintain scientific integrity and humility.

This was very helpful, thank you!

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Writing a scientific paper.

• Writing a lab report
• INTRODUCTION

Writing a "good" discussion section

"discussion and conclusions checklist" from: how to write a good scientific paper. chris a. mack. spie. 2018., peer review.

• LITERATURE CITED
• Bibliography of guides to scientific writing and presenting
• Presentations
• Lab Report Writing Guides on the Web

This is is usually the hardest section to write. You are trying to bring out the true meaning of your data without being too long. Do not use words to conceal your facts or reasoning. Also do not repeat your results, this is a discussion.

• Present principles, relationships and generalizations shown by the results
• Point out exceptions or lack of correlations. Define why you think this is so.
• Show how your results agree or disagree with previously published works
• Discuss the theoretical implications of your work as well as practical applications
• State your conclusions clearly. Summarize your evidence for each conclusion.
• Discuss the significance of the results
•  Evidence does not explain itself; the results must be presented and then explained.
• Typical stages in the discussion: summarizing the results, discussing whether results are expected or unexpected, comparing these results to previous work, interpreting and explaining the results (often by comparison to a theory or model), and hypothesizing about their generality.
• Discuss any problems or shortcomings encountered during the course of the work.
• Discuss possible alternate explanations for the results.
• Avoid: presenting results that are never discussed; presenting discussion that does not relate to any of the results; presenting results and discussion in chronological order rather than logical order; ignoring results that do not support the conclusions; drawing conclusions from results without logical arguments to back them up. 

CONCLUSIONS

• Provide a very brief summary of the Results and Discussion.
• Emphasize the implications of the findings, explaining how the work is significant and providing the key message(s) the author wishes to convey.
• Provide the most general claims that can be supported by the evidence.
• Provide a future perspective on the work.
• Avoid: repeating the abstract; repeating background information from the Introduction; introducing new evidence or new arguments not found in the Results and Discussion; repeating the arguments made in the Results and Discussion; failing to address all of the research questions set out in the Introduction. 

WHAT HAPPENS AFTER I COMPLETE MY PAPER?

 The peer review process is the quality control step in the publication of ideas.  Papers that are submitted to a journal for publication are sent out to several scientists (peers) who look carefully at the paper to see if it is "good science".  These reviewers then recommend to the editor of a journal whether or not a paper should be published. Most journals have publication guidelines. Ask for them and follow them exactly.    Peer reviewers examine the soundness of the materials and methods section.  Are the materials and methods used written clearly enough for another scientist to reproduce the experiment?  Other areas they look at are: originality of research, significance of research question studied, soundness of the discussion and interpretation, correct spelling and use of technical terms, and length of the article.

• << Previous: RESULTS
• Next: LITERATURE CITED >>
• Last Updated: Aug 4, 2023 9:33 AM
• URL: https://guides.lib.uci.edu/scientificwriting

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

How to Write an Effective Discussion

• November 2004
• Respiratory Care 49(10):1238-41
• 49(10):1238-41

• Massachusetts General Hospital

Abstract and Figures

Discover the world's research

• 25+ million members
• 160+ million publication pages
• 2.3+ billion citations
• Jan P Vandenbroucke
• Erik von Elm
• Douglas G. Altman
• Matthias Egger

• María Chaparro

• İbrahim Sayin
• J CLIN APHERESIS
• Robert Weinstein

• Pitchai Balakumar
• Ali S. Alqahtani

• François Swart

• Johannes C Heydenreich
• Chris T Bolliger
• Antonio Antón

• Douglas K Orens
• Cynthia Fatica
• Alejandro C Arroliga
• Eleni Apostolopoulou
• Petros Bakakos

• Leonides Gregorakos
• Robert R Fluck
• Christine Schroeder
• Brenda Engbretson
• Recruit researchers
• Join for free
• Login Email Tip: Most researchers use their institutional email address as their ResearchGate login Password Forgot password? Keep me logged in Log in or Continue with Google Welcome back! Please log in. Email · Hint Tip: Most researchers use their institutional email address as their ResearchGate login Password Forgot password? Keep me logged in Log in or Continue with Google No account? Sign up

Welcome to the new OASIS website! We have academic skills, library skills, math and statistics support, and writing resources all together in one new home.

• Walden University
• Faculty Portal

General Research Paper Guidelines: Discussion

Discussion section.

The overall purpose of a research paper’s discussion section is to evaluate and interpret results, while explaining both the implications and limitations of your findings. Per APA (2020) guidelines, this section requires you to “examine, interpret, and qualify the results and draw inferences and conclusions from them” (p. 89). Discussion sections also require you to detail any new insights, think through areas for future research, highlight the work that still needs to be done to further your topic, and provide a clear conclusion to your research paper. In a good discussion section, you should do the following:

• Clearly connect the discussion of your results to your introduction, including your central argument, thesis, or problem statement.
• Provide readers with a critical thinking through of your results, answering the “so what?” question about each of your findings. In other words, why is this finding important?
• Detail how your research findings might address critical gaps or problems in your field
• Compare your results to similar studies’ findings
• Provide the possibility of alternative interpretations, as your goal as a researcher is to “discover” and “examine” and not to “prove” or “disprove.” Instead of trying to fit your results into your hypothesis, critically engage with alternative interpretations to your results.

For more specific details on your Discussion section, be sure to review Sections 3.8 (pp. 89-90) and 3.16 (pp. 103-104) of your 7 th edition APA manual

*Box content adapted from:

University of Southern California (n.d.). Organizing your social sciences research paper: 8 the discussion . https://libguides.usc.edu/writingguide/discussion

Limitations

Limitations of generalizability or utility of findings, often over which the researcher has no control, should be detailed in your Discussion section. Including limitations for your reader allows you to demonstrate you have thought critically about your given topic, understood relevant literature addressing your topic, and chosen the methodology most appropriate for your research. It also allows you an opportunity to suggest avenues for future research on your topic. An effective limitations section will include the following:

• Detail (a) sources of potential bias, (b) possible imprecision of measures, (c) other limitations or weaknesses of the study, including any methodological or researcher limitations.
• Sample size: In quantitative research, if a sample size is too small, it is more difficult to generalize results.
• Lack of available/reliable data : In some cases, data might not be available or reliable, which will ultimately affect the overall scope of your research. Use this as an opportunity to explain areas for future study.
• Lack of prior research on your study topic: In some cases, you might find that there is very little or no similar research on your study topic, which hinders the credibility and scope of your own research. If this is the case, use this limitation as an opportunity to call for future research. However, make sure you have done a thorough search of the available literature before making this claim.
• Flaws in measurement of data: Hindsight is 20/20, and you might realize after you have completed your research that the data tool you used actually limited the scope or results of your study in some way. Again, acknowledge the weakness and use it as an opportunity to highlight areas for future study.
• Limits of self-reported data: In your research, you are assuming that any participants will be honest and forthcoming with responses or information they provide to you. Simply acknowledging this assumption as a possible limitation is important in your research.
• Access: Most research requires that you have access to people, documents, organizations, etc.. However, for various reasons, access is sometimes limited or denied altogether. If this is the case, you will want to acknowledge access as a limitation to your research.
• Time: Choosing a research focus that is narrow enough in scope to finish in a given time period is important. If such limitations of time prevent you from certain forms of research, access, or study designs, acknowledging this time restraint is important. Acknowledging such limitations is important, as they can point other researchers to areas that require future study.
• Potential Bias: All researchers have some biases, so when reading and revising your draft, pay special attention to the possibilities for bias in your own work. Such bias could be in the form you organized people, places, participants, or events. They might also exist in the method you selected or the interpretation of your results. Acknowledging such bias is an important part of the research process.
• Language Fluency: On occasion, researchers or research participants might have language fluency issues, which could potentially hinder results or how effectively you interpret results. If this is an issue in your research, make sure to acknowledge it in your limitations section.

University of Southern California (n.d.). Organizing your social sciences research paper: Limitations of the study . https://libguides.usc.edu/writingguide/limitations

In many research papers, the conclusion, like the limitations section, is folded into the larger discussion section. If you are unsure whether to include the conclusion as part of your discussion or as a separate section, be sure to defer to the assignment instructions or ask your instructor.

The conclusion is important, as it is specifically designed to highlight your research’s larger importance outside of the specific results of your study. Your conclusion section allows you to reiterate the main findings of your study, highlight their importance, and point out areas for future research. Based on the scope of your paper, your conclusion could be anywhere from one to three paragraphs long. An effective conclusion section should include the following:

• Describe the possibilities for continued research on your topic, including what might be improved, adapted, or added to ensure useful and informed future research.
• Provide a detailed account of the importance of your findings
• Reiterate why your problem is important, detail how your interpretation of results impacts the subfield of study, and what larger issues both within and outside of your field might be affected from such results

University of Southern California (n.d.). Organizing your social sciences research paper: 9. the conclusion . https://libguides.usc.edu/writingguide/conclusion

• Previous Page: Results
• Next Page: References
• Office of Student Disability Services

Walden Resources

Departments.

• Academic Residencies
• Academic Skills
• Career Planning and Development
• Customer Care Team
• Field Experience
• Military Services
• Student Success Advising
• Writing Skills

Centers and Offices

• Center for Social Change
• Office of Academic Support and Instructional Services
• Office of Degree Acceleration
• Office of Research and Doctoral Services
• Office of Student Affairs

Student Resources

• Doctoral Writing Assessment
• Form & Style Review
• Quick Answers
• ScholarWorks
• SKIL Courses and Workshops
• Walden Bookstore
• Walden Catalog & Student Handbook
• Student Safety/Title IX
• Legal & Consumer Information
• Website Terms and Conditions
• Cookie Policy
• Accessibility
• Accreditation
• State Authorization
• Net Price Calculator
• Cost of Attendance
• Contact Walden

Walden University is a member of Adtalem Global Education, Inc. www.adtalem.com Walden University is certified to operate by SCHEV © 2024 Walden University LLC. All rights reserved.

How to Start a Discussion Section in Research? [with Examples]

The examples below are from 72,017 full-text PubMed research papers that I analyzed in order to explore common ways to start writing the Discussion section.

Research papers included in this analysis were selected at random from those uploaded to PubMed Central between the years 2016 and 2021. Note that I used the BioC API to download the data (see the References section below).

Examples of how to start writing the Discussion section

In the Discussion section, you should explain the meaning of your results, their importance, and implications. [for more information, see: How to Write & Publish a Research Paper: Step-by-Step Guide ]

The Discussion section can:

1. Start by restating the study objective

“ The purpose of this study was to investigate the relationship between muscle synergies and motion primitives of the upper limb motions.” Taken from the Discussion section of this article on PubMed

“ The main objective of this study was to identify trajectories of autonomy.” Taken from the Discussion section of this article on PubMed

“ In the present study, we investigated the whole brain regional homogeneity in patients with melancholic MDD and non-melancholic MDD at rest . “ Taken from the Discussion section of this article on PubMed

2. Start by mentioning the main finding

“ We found that autocracy and democracy have acted as peaks in an evolutionary landscape of possible modes of institutional arrangements.” Taken from the Discussion section of this article on PubMed

“ In this study, we demonstrated that the neural mechanisms of rhythmic movements and skilled movements are similar.” Taken from the Discussion section of this article on PubMed

“ The results of this study show that older adults are a diverse group concerning their activities on the Internet.” Taken from the Discussion section of this article on PubMed

3. Start by pointing out the strength of the study

“ To our knowledge, this investigation is by far the largest epidemiological study employing real-time PCR to study periodontal pathogens in subgingival plaque.” Taken from the Discussion section of this article on PubMed

“ This is the first human subject research using the endoscopic hemoglobin oxygen saturation imaging technology for patients with aero-digestive tract cancers or adenomas.” Taken from the Discussion section of this article on PubMed

“ In this work, we introduced a new real-time flow imaging method and systematically demonstrated its effectiveness with both flow phantom experiments and in vivo experiments.” Taken from the Discussion section of this article on PubMed

Most used words at the start of the Discussion

Here are the top 10 phrases used to start a discussion section in our dataset:

• Comeau DC, Wei CH, Islamaj Doğan R, and Lu Z. PMC text mining subset in BioC: about 3 million full text articles and growing,  Bioinformatics , btz070, 2019.

Further reading

• How Long Should the Discussion Section Be? Data from 61,517 Examples
• How to Write & Publish a Research Paper: Step-by-Step Guide
• “I” & “We” in Academic Writing: Examples from 9,830 Studies

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• BMC Med Res Methodol

Writing a discussion section: how to integrate substantive and statistical expertise

Michael höfler.

1 Institute of Clinical Psychology and Psychotherapy, Technische Universität Dresden, Dresden, Germany

5 Chair of Clinical Psychology and Behavioural Neuroscience, Institute of Clinical Psychology and Psychotherapy, Technische Universität Dresden, Dresden, Germany

2 Behavioral Epidemiology, Institute of Clinical Psychology and Psychotherapy, Technische Universität Dresden, Dresden, Germany

Sebastian Trautmann

Robert miller.

3 Faculty of Psychology, Technische Universität Dresden, Dresden, Germany

4 Department of Medical Epidemiology and Biostatistics, Karolinska Institute, Stockholm, Sweden

Associated Data

Not applicable.

When discussing results medical research articles often tear substantive and statistical (methodical) contributions apart, just as if both were independent. Consequently, reasoning on bias tends to be vague, unclear and superficial. This can lead to over-generalized, too narrow and misleading conclusions, especially for causal research questions.

To get the best possible conclusion, substantive and statistical expertise have to be integrated on the basis of reasonable assumptions. While statistics should raise questions on the mechanisms that have presumably created the data, substantive knowledge should answer them. Building on the related principle of Bayesian thinking, we make seven specific and four general proposals on writing a discussion section.

Misinterpretation could be reduced if authors explicitly discussed what can be concluded under which assumptions. Informed on the resulting conditional conclusions other researchers may, according to their knowledge and beliefs, follow a particular conclusion or, based on other conditions, arrive at another one. This could foster both an improved debate and a better understanding of the mechanisms behind the data and should therefore enable researchers to better address bias in future studies.

After a research article has presented the substantive background, the methods and the results, the discussion section assesses the validity of results and draws conclusions by interpreting them. The discussion puts the results into a broader context and reflects their implications for theoretical (e.g. etiological) and practical (e.g. interventional) purposes. As such, the discussion contains an article’s last words the reader is left with.

Common recommendations for the discussion section include general proposals for writing [ 1 ] and structuring (e.g. with a paragraph on a study’s strengths and weaknesses) [ 2 ], to avoid common statistical pitfalls (like misinterpreting non-significant findings as true null results) [ 3 ] and to “go beyond the data” when interpreting results [ 4 ]. Note that the latter includes much more than comparing an article’s results with the literature. If results and literature are consistent, this might be due to shared bias only. If they are not consistent, the question arises why inconsistency occurs – maybe because of bias acting differently across studies [ 5 – 7 ]. Recommendations like the CONSORT checklist do well in demanding all quantitative information on design, participation, compliance etc. to be reported in the methods and results section and “addressing sources of potential bias”, “limitations” and “considering other relevant evidence” in the discussion [ 8 , 9 ]. Similarly, the STROBE checklist for epidemiological research demands “a cautious overall interpretation of results” and "discussing the generalizability (external validity)" [ 10 , 11 ]. However, these guidelines do not clarify how to deal with the complex bias issue, and how to get to and report conclusions.

Consequently, suggestions on writing a discussion often remain vague by hardly addressing the role of the assumptions that have (often implicitly) been made when designing a study, analyzing the data and interpreting the results. Such assumptions involve mechanisms that have created the data and are related to sampling, measurement and treatment assignment (in observational studies common causes of factor and outcome) and, as a consequence, the bias this may produce [ 5 , 6 ]. They determine whether a result allows only an associational or a causal conclusion. Causal conclusions, if true, are of much higher relevance for etiology, prevention and intervention. However, they require much stronger assumptions. These have to be fully explicit and, therewith, essential part of the debate since they always involve subjectivity. Subjectivity is unavoidable because the mechanisms behind the data can never be fully estimated from the data themselves [ 12 ].

In this article, we argue that the conjunction of substantive and statistical (methodical) knowledge in the verbal integration of results and beliefs on mechanisms can be greatly improved in (medical) research papers. We illustrate this through the personal roles that a statistician (i.e. methods expert) and a substantive researcher should take. Doing so, we neither claim that usually just two people write a discussion, nor that one person lacks the knowledge of the other, nor that there were truly no researchers that have both kinds of expertise. As a metaphor, the division of these two roles into two persons describes the necessary integration of knowledge via the mode of a dialogue. Verbally, it addresses the finding of increased specialization of different study contributors in biomedical research. This has teared apart the two processes of statistical compilation of results and their verbal integration [ 13 ]. When this happens a statistician alone is limited to a study’s conditions (sampled population, experimental settings etc.), because he or she is unaware of the conditions’ generalizability. On the other hand, a A substantive expert alone is prone to over-generalize because he or she is not aware of the (mathematical) prerequisites for an interpretation.

The article addresses both (medical) researchers educated in basic statistics and research methods and statisticians who cooperate with them. Throughout the paper we exemplify our arguments with the finding of an association in a cross-tabulation between a binary X (factor) and a binary Y (outcome): those who are exposed to or treated with X have a statistically significantly elevated risk for Y as compared to the non-exposed or not (or otherwise) treated (for instance via the chi-squared independence test or logistic regression). Findings like this are frequent and raise the question which more profound conclusion is valid under what assumptions. Until some decades ago, statistics has largely avoided the related topic of causality and instead limited itself on describing observed distributions (here a two-by-two table between D = depression and LC = lung cancer) with well-fitting models.

We illustrate our arguments with the concrete example of the association found between the factor depression (D) and the outcome lung cancer (LC) [ 14 ]. Yet very different mechanisms could have produced such an association [ 7 ], and assumptions on these lead to the following fundamentally different conclusions (Fig. ​ (Fig.1 1 ):

• D causes LC (e.g. because smoking might constitute “self-medication” of depression symptoms)
• LC causes D (e.g. because LC patients are demoralized by their diagnosis)
• D and LC cause each other (e.g. because the arguments in both a. and b. apply)
• D and LC are the causal consequence of the same factor(s) (e.g. poor health behaviors - HB)
• D and LC only share measurement error (e.g. because a fraction of individuals that has either depression or lung cancer denies both in self-report measures).

Different conclusions about an association between D and LC. a D causes LC, b LC causes B, c D and LC cause each other, d D and LC are associated because of a shared factor (HB), e D and LC are associated because they have correlated errors

Note that we use the example purely for illustrative purposes. We do not make substantive claims on what of a. through e. is true but show how one should reflect on mechanisms in order to find the right answer. Besides, we do not consider research on the D-LC relation apart from the finding of association [ 14 ].

Assessing which of a. through e. truly applies requires substantive assumptions on mechanisms: the temporal order of D and LC (a causal effect requires that the cause occurs before the effect), shared factors, selection processes and measurement error. Questions on related mechanisms have to be brought up by statistical consideration, while substantive reasoning has to address them. Together this yields provisional assumptions for inferring that are subject to readers’ substantive consideration and refinement. In general, the integration of prior beliefs (anything beyond the data a conclusion depends on) and the results from the data themselves is formalized by Bayesian statistics [ 15 , 16 ]. This is beyond the scope of this article, still we argue that Bayesian thinking should govern the process of drawing conclusions.

Building on this idea, we provide seven specific and four general recommendations for the cooperative process of writing a discussion. The recommendations are intended to be suggestions rather than rules. They should be subject to further refinement and adjustment to specific requirements in different fields of medical and other research. Note that the order of the points is not meant to structure a discussion’s writing (besides 1.).

Recommendations for writing a discussion section

Specific recommendations.

Consider the example on the association between D and LC. Rather than starting with an in-depth (causal) interpretation a finding should firstly be taken as what it allows inferring without doubt: Under the usual assumptions that a statistical model makes (e.g. random sampling, independence or certain correlation structure between observations [ 17 ]), the association indicates that D (strictly speaking: measuring D) predicts an elevated LC risk (strictly speaking: measuring LC) in the population that one has managed to sample (source population). Assume that the sample has been randomly drawn from primary care settings. In this case the association is useful to recommend medical doctors to better look at an individual’s LC risk in case of D. If the association has been adjusted for age and gender (conveniently through a regression model), the conclusion modifies to: If the doctor knows a patient’s age and gender (what should always be the case) D has additional value in predicting an elevated LC risk.

In the above example, a substantive researcher might want to conclude that D and LC are associated in a general population instead of just inferring to patients in primary care settings (a.). Another researcher might even take the finding as evidence for D being a causal factor in the etiology of LC, meaning that prevention of D could reduce the incidence rate of LC (in whatever target population) (b.). In both cases, the substantive researcher should insist on assessing the desired interpretation that goes beyond the data [ 4 ], but the statistician immediately needs to bring up the next point.

The explanation of all the assumptions that lead from a data result to a conclusion enables a reader to assess whether he or she agrees with the authors’ inference or not. These conditions, however, often remain incomplete or unclear, in which case the reader can hardly assess whether he or she follows a path of argumentation and, thus, shares the conclusion this path leads to.

Consider conclusion a. and suppose that, instead of representative sampling in a general population (e.g. all U.S. citizens aged 18 or above), the investigators were only able to sample in primary care settings. Extrapolating the results to another population than the source population requires what is called “external validity”, “transportability” or the absence of “selection bias” [ 18 , 19 ]. No such bias occurs if the parameter of interest is equal in the source and the target population. Note that this is a weaker condition than the common belief that the sample must represent the target population in everything . If the parameter of interest is the difference in risk for LC between cases and non-cases of D, the condition translates into: the risk difference must be equal in target and source population.

For the causal conclusion b., however, sufficient assumptions are very strict. In an RCT, the conclusion is valid under random sampling from the target population, random allocation of X, perfect compliance in X, complete participation and no measurement error in outcome (for details see [ 20 ]). In practice, on the other hand, the derivations from such conditions might sometimes be modest what may produce little bias only. For instance, non-compliance in a specific drug intake (treatment) might occur only in a few individuals to little extent through a random process (e.g. sickness of a nurse being responsible for drug dispense) and yield just small (downward) bias [ 5 ]. The conclusion of downward bias might also be justified if non-compliance does not cause anything that has a larger effect on a Y than the drug itself. Another researcher, however, could believe that non-compliance leads to taking a more effective, alternative treatment. He or she could infer upward bias instead if well-informed on the line of argument.

In practice, researchers frequently use causal language yet without mentioning any assumptions. This does not imply that they truly have a causal effect in mind, often causal and associational wordings are carelessly used in synonymous way. For example, concluding “depression increases the risk of lung cancer” constitutes already causal wording because it implies that a change in the depression status would change the cancer risk. Associational language like “lung cancer risk is elevated if depression occurs”, however, would allow for an elevated lung cancer risk in depression cases just because LC and D share some causes (“inducing” or “removing” depression would not change the cancer risk here).

Often, it is unclear where the path of argumentation from assumptions to a conclusion leads when alternative assumptions are made. Consider again bias due to selection. A different effect in target and source population occurs if effect-modifying variables distribute differently in both populations. Accordingly, the statistician should ask which variables influence the effect of interest, and whether these can be assumed to distribute equally in the source population and the target population. The substantive researcher might answer that the causal risk difference between D and LC likely increases with age. Given that this is true, and if elder individuals have been oversampled (e.g. because elderly are over-represented in primary care settings), both together would conclude that sampling has led to over-estimation (despite other factors, Fig. ​ Fig.2 2 ).

If higher age is related to a larger effect (risk difference) of D on LC, a larger effect estimate is expected in an elder sample

However, the statistician might add, if effect modification is weak, or the difference in the age distributions is modest (e.g. mean 54 vs. 52 years), selection is unlikely to have produced large (here: upward) bias. In turn, another substantive researcher, who reads the resulting discussion, might instead assume a decrease of effect with increasing age and thus infer downward bias.

In practice, researchers should be extremely sensitive for bias due to selection if a sample has been drawn conditionally on a common consequence of factor and outcome or a variable associated with such a consequence [19 and references therein]. For instance, hospitalization might be influenced by both D and LC, and thus sampling from hospitals might introduce a false association or change an association’s sign; particularly D and LC may appear to be negatively associated although the association is positive in the general population (Fig. ​ (Fig.3 3 ).

If hospitalization (H) is a common cause of D and LC, sampling conditionally on H can introduce a spurious association between D and LC ("conditioning on a collider")

Usually, only some kinds of bias are discussed, while the consequences of others are ignored [ 5 ]. Besides selection the main sources of bias are often measurement and confounding. If one is only interested in association, confounding is irrelevant. For causal conclusions, however, assumptions on all three kinds of bias are necessary.

Measurement error means that the measurement of a factor and/or outcome deviates from the true value, at least in some individuals. Bias due to measurement is known under many other terms that describe the reasons why such error occurs (e.g. “recall bias” and “reporting bias”). In contrast to conventional wisdom, measurement error does not always bias association and effect estimates downwards [ 5 , 6 ]. It does, for instance, if only the factor (e.g. depression) is measured with error and the errors occur independently from the outcome (e.g. lung cancer), or vice versa (“non-differential misclassification”) [22 and references therein]. However, many lung cancer cases might falsely report depression symptoms (e.g. to express need for care). Such false positives (non-cases of depression classified as cases) may also occur in non-cases of lung cancer but to a lesser extent (a special case of “differential misclassification”). Here, bias might be upward as well. Importantly, false positives cause larger bias than false negatives (non-cases of depression falsely classified as depression cases) as long as the relative frequency of a factor is lower than 50% [ 21 ]. Therefore, they should receive more attention in discussion. If measurement error occurs in depression and lung cancer, the direction of bias also depends on the correlation between both errors [ 21 ].

Note that what is in line with common standards of “good” measurement (e.g. a Kappa value measuring validity or reliability of 0.7) might anyway produce large bias. This applies to estimates of prevalence, association and effect. The reason is that while indices of measurement are one-dimensional, bias depends on two parameters (sensitivity and specificity) [ 21 , 22 ]. Moreover, estimates of such indices are often extrapolated to different kinds of populations (typically from a clinical to general population), what may be inadequate. Note that the different kinds of bias often interact, e.g. bias due to measurement might depend on selection (e.g. measurement error might differ between a clinical and a general population) [ 5 , 6 ].

Assessment of bias due to confounding variables (roughly speaking: common causes of factor and outcome) requires assumptions on the entire system of variables that affect both factor and outcome. For example, D and LC might share several causes such as stressful life events or socioeconomic status. If these influence D and LC with the same effect direction, this leads to overestimation, otherwise (different effect directions) the causal effect is underestimated. In the medical field, many unfavorable conditions may be positively related. If this holds true for all common factors of D and LC, upward bias can be assumed. However, not all confounders have to be taken into account. Within the framework of “causal graphs”, the “backdoor criterion” [ 7 ] provides a graphical rule for sets of confounders to be sufficient when adjusted for. Practically, such a causal graph must include all factors that directly or indirectly affect both D and LC. Then, adjustment for a set of confounders that meets the “backdoor criterion” in the graph completely removes bias due to confounding. In the example of Fig. ​ Fig.4 4 it is sufficient to adjust for Z 1 and Z 2 because this “blocks” all paths that otherwise lead backwards from D to LC. Note that fully eliminating bias due to confounding also requires that the confounders have been collected without measurement error [ 5 , 6 , 23 ]. Therefore, the advice is always to concede at least some “residual” bias and reflect on the direction this might have (could be downward if such error is not stronger related to D and LC than a confounder itself).

Causal graph for the effect of D on LC and confounders Z 1 , Z 2 and Z 3

Whereas the statistician should pinpoint to the mathematical insight of the backdoor criterion, its application requires profound substantive input and literature review. Of course, there are numerous relevant factors in the medical field. Hence, one should practically focus on those with the highest prevalence (a very seldom factor can hardly cause large bias) and large assumed effects on both X and Y.

If knowledge on any of the three kinds of bias is poor or very uncertain, researchers should admit that this adds uncertainty in a conclusion: systematic error on top of random error. In the Bayesian framework, quantitative bias analysis formalizes this through the result of larger variance in an estimate. Technically, this additional variance is introduced via the variances of distributions assigned to “bias parameters”; for instance a misclassification probability (e.g. classifying a true depression case as non-case) or the prevalence of a binary confounder and its effects on X and Y. Of course, bias analysis also changes point estimates (hopefully reducing bias considerably). Note that conventional frequentist analysis, as regarded from the Bayesian perspective, assumes that all bias parameters were zero with a probability of one [ 5 , 6 , 23 ]. The only exceptions (bias addressed in conventional analyses) are adjustment on variables to hopefully reduce bias due to confounding and weighting the individuals (according to variables related to participation) to take into account bias due to selection.

If the substantive investigator understands the processes of selection, measurement and confounding only poorly, such strict analysis numerically reveals that little to nothing is known on the effect of X on Y, no matter how large an observed association and a sample (providing small random error) may be [ 5 , 6 , 23 ]). This insight has to be brought up by the statistician. Although such an analysis is complicated, itself very sensitive to how it is conducted [ 5 , 6 ] and rarely done, the Bayesian thinking behind it forces researchers to better understand the processes behind the data. Otherwise, he or she cannot make any assumptions and, in turn, no conclusion on causality.

Usually articles end with statements that only go little further than the always true but never informative statement “more research is needed”. Moreover, larger samples and better measurements are frequently proposed. If an association has been found, a RCT or other interventional study is usually proposed to investigate causality. In our example, this recommendation disregards that: (1) onset of D might have a different effect on LC risk than an intervention against D (the effect of onset cannot be investigated in any interventional study), (2) the effects of onset and intervention concern different populations (those without vs. those with depression), (3) an intervention effect depends on the mode of intervention [ 24 ], and (4) (applying the backdoor criterion) a well-designed observational study may approximatively yield the same result as a randomized study would [ 25 – 27 ]. If the effect of “removing” depression is actually of interest, one could propose an RCT that investigates the effect of treating depression in a strictly defined way and in a strictly defined population (desirably in all who meet the criteria of depression). Ideally, this population is sampled randomly, and non-participants and dropouts are investigated with respect to assumed effect-modifiers (differences in their distributions between participants and non-participants can then be addressed e.g. by weighting [ 27 ]). In a non-randomized study, one should collect variables supposed to meet the backdoor-criterion with the best instruments possible.

General recommendations

Yet when considering 1) through 7); i.e. carefully reflecting on the mechanisms that have created the data, discussions on statistical results can be very misleading, because the basic statistical methods are mis-interpreted or inadequately worded.

A common pitfall is to consider the lack of evidence for the alternative hypothesis (e.g. association between D and LC) as evidence for the null hypothesis (no association). In fact, such inference requires an a-priori calculated sample-size to ensure that the type-two error probability does not exceed a pre-specified limit (typically 20% or 10%, given the other necessary assumptions, e.g. on the true magnitude of association). Otherwise, the type-two error is unknown and in practice often large. This may put a “false negative result” into the scientific public that turns out to be “unreplicable” – what would be falsely interpreted as part of the “replication crisis”. Such results are neither positive nor negative but uninformative . In this case, the wording “there is no evidence for an association” is adequate because it does not claim that there is no association.

Frequently, it remains unclear which hypotheses have been a-priori specified and which have been brought up only after some data analysis. This, of course, is scientific malpractice because it does not enable the readership to assess the random error emerging from explorative data analysis. Accordingly, the variance of results across statistical methods is often misused to filter out the analysis that yields a significant result (“ p -hacking”, [ 28 ]). Pre-planned tests (via writing a grant) leave at least less room for p-hacking because they specify a-priori which analysis is to be conducted.

On the other hand, post-hoc analyses can be extremely useful for identifying unexpected phenomena and creating new hypotheses. Verbalization in the discussion section should therefore sharply separate between conclusions from hypothesis testing and new hypotheses created from data exploration. The distinction is profound, since a newly proposed hypothesis just makes a new claim. Suggesting new hypotheses cannot be wrong, this can only be inefficient if many hypotheses turn out to be wrong. Therefore, we suggest proposing only a limited number of new hypotheses that appear promising to stimulate further research and scientific progress. They are to be confirmed or falsified with future studies. A present discussion, however, should yet explicate the testable predictions a new hypothesis entails, and how a future study should be designed to keep bias in related analyses as small as possible.

Confidence intervals address the problem of reducing results to the dichotomy of significant and non-significant through providing a range of values that are compatible with the data at the given confidence level, usually 95% [ 29 ].

This is also addressed by Bayesian statistics that allows calculating what frequentist p -values are often misinterpreted to be: the probability that the alternative (or null) hypothesis is true [ 17 ]. Moreover, one can calculate how likely it is that the parameter lies within any specified range (e.g. the risk difference being greater than .05, a lower boundary for practical significance) [ 15 , 16 ]. To gain these benefits, one needs to specify how the parameter of interest (e.g. causal risk difference between D and LC) is distributed before inspecting the data. In Bayesian statistics (unlike frequentist statistics) a parameter is a random number that expresses prior beliefs via a “prior distribution”. Such a “prior” is combined with the data result to a “posterior distribution”. This integrates both sources of information.

Note that confidence intervals also can be interpreted from the Bayesian perspective (then called “credibility interval”). This assumes that all parameter values were equally likely (uniformly distributed, strictly speaking) before analyzing the data [ 5 , 6 , 20 ].

Testing just for a non-zero association can only yield evidence for an association deviating from zero. A better indicator for the true impact of an effect/association for clinical, economic, political, or research purposes is its magnitude. If an association between D and LC after adjusting for age and gender has been discovered, then the knowledge of D has additional value in predicting an elevated LC probability beyond age and gender. However, there may be many other factors that stronger predict LC and thus should receive higher priority in a doctor’s assessment. Besides, if an association is small, it may yet be explained by modest (upward) bias. Especially large samples often yield significant results with little practical value. The p -value does not measure strength of association [ 17 ]. For instance, in a large sample, a Pearson correlation between two dimensional variables could equal 0.1 only but with a p -value <.001. A further problem arises if the significance threshold of .05 is weakened post-hoc to allow for “statistical trends” ( p between .05 and .10) because a result has “failed to reach significance” (this wording claims that there is truly an association. If this was known, no research would be necessary).

It is usually the statistician’s job to insist not only on removing the attention from pure statistical significance to confidence intervals or even Bayesian interpretation, but also to point out the necessity of a meaningful cutoff for practical significance. The substantive researcher then has to provide this cutoff.

Researchers should not draw conclusions that have not been explicitly tested for. For example, one may have found a positive association between D and LC (e.g. p  = .049), but this association is not significant (e.g. p  = .051), when adjusting for “health behavior”. This does not imply that “health behavior” “explains” the association (yet fully). The difference in magnitude of association in both analyses compared here (without and with adjustment on HB) may be very small and the difference in p -values (“borderline significance” after adjustment) likely to emerge from random error. This often applies to larger differences in p as well.

Investigators, however, might find patterns in their results that they consider worth mentioning for creating hypotheses. In the example above, adding the words “in the sample”, would clarify that they refer just to the difference of two point estimates . By default, “association” in hypotheses testing should mean “statistically significant association” (explorative analyses should instead refer to “suggestive associations”).

Conclusions

Some issues of discussing results not mentioned yet appear to require only substantive reasoning. For instance, Bradford Hill’s consideration on “plausibility” claims that a causal effect is more likely, if it is in line with biological (substantive) knowledge, or if a dose-response relation has been found [ 30 ]. However, the application of these considerations itself depends on the trueness of assumptions. For instance, bias might act differently across the dose of exposure (e.g. larger measurement error in outcome among those with higher dosage). As a consequence, a pattern observed across dose may mask a true or pretend a wrong dose-response relation [ 30 ]. This again has to be brought up by statistical expertise.

There are, however, some practical issues that hinder the cooperation we suggest. First, substantive researchers often feel discomfort when urged to make assumptions on the mechanisms behind the data, presumably because they fear to be wrong. Here, the statistician needs to insist: “If you are unable to make any assumptions, you cannot conclude anything!” And: “As a scientist you have to understand the processes that create your data.” See [ 31 ] for practical advice on how to arrive at meaningful assumptions.

Second, statisticians have long been skeptical against causal inference. Still, most of them focus solely on describing observed data with distributional models, probably because estimating causal effects has long been regarded as unfeasible with scientific methods. Training in causality remains rather new, since strict mathematical methods have been developed only in the last decades [ 7 ].

The cooperation could be improved if education in both fields focused on the insight that one cannot succeed without the other. Academic education should demonstrate that in-depth conclusions from data unavoidably involve prior beliefs. Such education should say: Data do not “speak for themselves”, because they “speak” only ambiguously and little, since they have been filtered through various biases [ 32 ]. The subjectivity introduced by addressing bias, however, unsettles many researchers. On the other hand, conventional frequentist statistics just pretends to be objective. Instead of accepting the variety of possible assumptions, it makes the absurd assumption of “no bias with probability of one”. Or it avoids causal conclusions at all if no randomized study is possible. This limits science to investigating just associations for all factors that can never be randomized (e.g. onset of depression). However, the alternative of Bayesian statistics and thinking are themselves prone to fundamental cognitive biases which should as well be subject of interdisciplinary teaching [ 33 ].

Readers may take this article as an invitation to read further papers’ discussions differently while evaluating our claims. Rather than sharing a provided conclusion (or not) they could ask themselves whether a discussion enables them to clearly specify why they share it (or not). If the result is uncertainty, this might motivate them to write their next discussion differently. The proposals made in this article could help shifting scientific debates to where they belong. Rather than arguing on misunderstandings caused by ambiguity in a conclusion’s assumptions one should argue on the assumptions themselves.

Acknowledgements

We acknowledge support by the German Research Foundation and the Open Access Publication Funds of the TU Dresden. We wish to thank Pia Grabbe and Helen Steiner for language editing and the cited authors for their outstanding work that our proposals build on.

John Venz is funded by the German Federal Ministry of Education and Research (BMBF) project no. 01ER1303 and 01ER1703. He has contributed to this manuscript outside of time funded by these projects.

Availability of data and materials

Abbreviations.

Authors’ contributions

MH and RM had the initial idea on the article. MH has taken the lead in writing. JV has contributed to the statistical parts, especially the Bayesian aspects. RM has refined the paragraphs on statistical inference. ST joined later and has added many clarifications related to the perspective of the substantive researcher. All authors have contributed to the final wording of all sections and the article’s revision. All authors read and approved the final manuscript.

Ethics approval and consent to participate

Consent for publication, competing interests.

The authors declare that they have no competing interests.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

How To Write A Research Paper

Research Paper Discussion Section

How to Write a Discussion For a Research Paper | Objectives, Steps & Examples

10 min read

Published on: Mar 6, 2024

Last updated on: Mar 5, 2024

People also read

How to Write a Research Paper Step by Step

How to Write a Proposal For a Research Paper in 10 Steps

A Comprehensive Guide to Creating a Research Paper Outline

Types of Research - Methodologies and Characteristics

350+ Interesting Research Paper Topics to Get You Started

Interesting Psychology Research Topics & Ideas

Qualitative Research - Types, Methods & Examples

Understanding Quantitative Research - Definition, Types, Examples, And More

Research Paper Example - Examples for Different Formats

How To Start A Research Paper - Steps With Examples

How To Write a Literature Review for a Research Paper | Steps & Examples

Types of Qualitative Research Methods - An Overview

Understanding Qualitative vs. Quantitative Research - A Complete Guide

How to Cite a Research Paper in Different Citation Styles

Easy Sociology Research Topics for Your Next Project

200+ Outstanding History Research Paper Topics With Expert Tips

How To Write a Hypothesis in a Research Paper | Steps & Examples

How to Write an Introduction for a Research Paper - A Step-by-Step Guide

How to Write a Good Research Paper Title

How to Write a Conclusion for a Research Paper in 3 Simple Steps

How to Write an Abstract For a Research Paper with Examples

How To Write a Thesis For a Research Paper Step by Step

How to Write the Results Section of a Research Paper - Structure and Tips

How to Write a Problem Statement for a Research Paper in 6 Steps

How To Write The Methods Section of a Research Paper Step-by-Step

How to Find Sources For a Research Paper | A Guide

Share this article

As a critical component of scholarly writing, the discussion serves as the intellectual heart of your work. It provides a platform to interpret findings, draw conclusions, and engage with existing literature. 

In this guide, we will cover the primary objectives of the discussion, outline the essential steps for writing, and provide insightful examples. Learning how to write a discussion is key to elevating the impact of your research conclusion.

Follow along as we break down the complexities and offer valuable insights to ensure your discussion section meets the highest standards!

On This Page On This Page -->

What is the Discussion Section in Research?

The discussion section is where the author interprets the results, contextualizes findings within the existing literature and engages in thoughtful analysis. 

According to the American Psychological Association (APA), the discussion is the space for reflection, providing a bridge between the results and the overall conclusion.  

The discussion section typically follows the results section but precedes the conclusion. 

People may sometimes confuse discussions and conclusions sections. While the conclusion summarizes key points, the discussion section interprets and analyzes the results in detail. The discussion goes beyond summarization, offering a deeper understanding of the study's implications and contributing to the scholarly conversation.

Elements of Discussion Section

The discussion section in a research paper comprises the following key elements:

• Summary : What are the main findings in a nutshell?
• Interpretations : How do you explain your results?
• Implications : Why are your findings important in the broader context?
• Limitations : What are the constraints in your methodology or data?
• Recommendations : What future studies or improvements arise from your outcomes?

Main Objectives of Discussion Section

The primary objectives of the discussion section include:

• To interpret the research findings accurately and comprehensively.
• To place the study in the broader context of existing literature.
• To engage in critical thinking and analysis of the results.
• To communicate the significance and implications of the study effectively.

How To Structure a Discussion

Follow these steps to draft a well-organized and effective discussion:

Now that you have a clear structure of your discussion section let’s move on to the writing phase. 

The steps below will help you write an effective research paper discussion section:

Step 1: Summarize your Results

Start the discussion section by providing a brief reintroduction to your research question or hypothesis. This serves to set the stage for the discussion, reminding readers of the study's primary focus.

Next, proceed to summarize your results. Offer a concise overview of the main findings, highlighting the most relevant outcomes of your research. This lays the groundwork for the subsequent interpretation and analysis.

Step 2: Provide Interpretations

In this step, highlight why your findings matter and how they enhance our understanding of the research area. Use a mix of qualitative and quantitative techniques to comprehensively interpret results.

Here are some key points to keep in mind:

• Explain the correlation, patterns, and relationships in your data. 
• Quantify these relations and clarify how they contribute to your study's understanding.
• Assess if your results align with expectations and whether they support or challenge existing theories.
• Relate your interpretations to past research and established theories, showcasing their challenges to existing knowledge. 
• If there are unexpected results, thoroughly explain them, explore reasons, and discuss their implications for the topic.

Organize your interpretations around themes, hypotheses, or research questions for a focused and structured discussion. Structure your interpretations based on the significance of findings or unexpected results to guide the reader through the crucial aspects of your study.

Step 3: Unpack the Implications

Unpacking the implications involves relating your findings to scholarly work. Discuss how your study aligns with or deviates from previous research from your literature review. It will showcase the academic context of your contributions.

Answer these questions:

• Do your results confirm or contest existing theories? If supporting, what fresh insights do they bring? If challenging, what could be the reasons?
• Are there practical applications of your findings?

Step 4: Discuss the Limitation

Limitations refer to factors that could potentially impact the accuracy, reliability, or scope of your study. They are aspects that were beyond your control or constraints within the research design.

Common Sources of Limitations

Limitations may arise due to various factors, such as the study's methodology, sample size, data collection tools, or external influences. Identifying these limitations is a crucial aspect of maintaining transparency in research.

How to Mention Limitations in the Discussion Section 

Even the most well-conducted studies have limitations. Mentioning these limitations will enhance your research paper's credibility: 

• Clearly and honestly state the limitations of your study. Transparency builds credibility and demonstrates a thoughtful approach to the research process.
• If there were limitations in your methodology (e.g., small sample size, survey design), discuss how these constraints might have affected the study's outcomes.
• If data collection presented challenges (e.g., limited access, response bias), explain how these issues might have impacted the reliability of your results.
• Acknowledge external factors beyond your control that might have influenced the study. This could include unforeseen events, changing societal norms, or evolving technologies.

Highlight limitations directly influencing your research problem or question for a concise and relevant discussion.

Step 5: Offer Recommendations

Having discussed the findings and limitations, it's now time to provide recommendations. These suggestions should arise from the insights gained during the study and serve as a guide for future studies.

How to Offer Recommendations

To offer recommendations keep in view the following points: 

• Base your recommendations on the insights discussed earlier. Consider what gaps or unanswered questions remain.
• If applicable, recommend ways to address the limitations discussed in the study. Propose methodologies or approaches that could enhance future research.
• Relate recommendations to practical applications whenever possible. Consider how future studies could provide actionable insights for real-world scenarios.
• Offer tangible suggestions for further research. Provide clear directions and highlight specific variables, populations, or contexts that warrant exploration.

Discussion Writing Tips - DO'S &  DONT'S

Here are some important tips to consider and some common mistakes to avoid when writing a discussion section for your research paper: 

• DO ensure that every point in your discussion directly relates back to your research questions or hypotheses. This maintains focus and relevance.
• DO prioritize clarity in your writing. Use concise and straightforward language to communicate complex ideas, making them accessible to a broad audience.
• DO acknowledge potential counterarguments or alternative explanations. This demonstrates a nuanced understanding of the topic and adds depth to your discussion.
• DO use concrete examples to illustrate your points. This helps readers grasp the practical implications of your findings and enhances the overall understanding.
• DO provide actionable recommendations for future studies. Give researchers clear directions and ideas for expanding on your work, contributing to the advancement of the field.
• DON'T introduce new information in the discussion. Stick to summarizing, interpreting, and discussing the results obtained in the study without adding fresh data or concepts.
• DON'T overgeneralize your findings. Be cautious not to make sweeping statements beyond the scope of your study or without sufficient evidence.
• DON'T ignore or downplay limitations. Be transparent about the constraints of your study, acknowledging potential biases or areas where improvements could be made.
• DON'T use jargon unnecessarily. While some field-specific terminology is essential, avoid excessive technical language that might confuse readers who are not familiar with the subject.
• DON'T rush the conclusion of your discussion. Take the time to craft a thoughtful and conclusive summary that encapsulates the key takeaways and implications of your study.

Discussion Section Examples

If you're new to crafting research paper discussions, seeking examples can serve as a helpful guide to tailor your approach according to your paper's style and type.

Discussion For A Scientific Paper

Discussion For A Medical Research Paper

Example of Result And Discussion In Research Paper

Discussion in A Report

Qualitative Research Discussion Example

Wrapping up, 

In this guide, we've explored the essential elements, steps, and provided examples to demystify the process.

By adhering to the outlined steps you ensure a well-rounded and insightful discussion. Always keep your research questions in focus, maintaining clarity and relevance.

Remember, discussions are not merely an endpoint but a springboard for future research. But if you find yourself struggling with the right syllables or structure for your discussion section, professional assistance is just a step away. 

Our reliable writing service is here to support you with your academic writing needs. With our experienced team, you can navigate the complexities of crafting a stellar discussion with confidence. 

Don't hesitate to reach out to our research paper writing service today!

Cathy A. (Marketing, Literature)

For more than five years now, Cathy has been one of our most hardworking authors on the platform. With a Masters degree in mass communication, she knows the ins and outs of professional writing. Clients often leave her glowing reviews for being an amazing writer who takes her work very seriously.

Paper Due? Why Suffer? That’s our Job!

Keep reading

Legal & Policies

• Privacy Policy
• Cookies Policy
• Terms of Use
• Refunds & Cancellations
• Our Writers
• Success Stories
• Our Guarantees
• Affiliate Program
• Referral Program
• AI Essay Writer

Disclaimer: All client orders are completed by our team of highly qualified human writers. The essays and papers provided by us are not to be used for submission but rather as learning models only.

• Foundations
• Write Paper

Search form

• Experiments
• Anthropology
• Self-Esteem
• Social Anxiety

• Research Paper >

Writing a Discussion Section

Writing a discussion section is where you really begin to add your interpretations to the work.

This article is a part of the guide:

• Outline Examples
• Example of a Paper
• Write a Hypothesis
• Introduction

Browse Full Outline

• 1 Write a Research Paper
• 2 Writing a Paper
• 3.1 Write an Outline
• 3.2 Outline Examples
• 4.1 Thesis Statement
• 4.2 Write a Hypothesis
• 5.2 Abstract
• 5.3 Introduction
• 5.4 Methods
• 5.5 Results
• 5.6 Discussion
• 5.7 Conclusion
• 5.8 Bibliography
• 6.1 Table of Contents
• 6.2 Acknowledgements
• 6.3 Appendix
• 7.1 In Text Citations
• 7.2 Footnotes
• 7.3.1 Floating Blocks
• 7.4 Example of a Paper
• 7.5 Example of a Paper 2
• 7.6.1 Citations
• 7.7.1 Writing Style
• 7.7.2 Citations
• 8.1.1 Sham Peer Review
• 8.1.2 Advantages
• 8.1.3 Disadvantages
• 8.2 Publication Bias
• 8.3.1 Journal Rejection
• 9.1 Article Writing
• 9.2 Ideas for Topics

In this critical part of the research paper, you start the process of explaining any links and correlations apparent in your data.

If you left few interesting leads and open questions in the results section , the discussion is simply a matter of building upon those and expanding them.

The Difficulties of Writing a Discussion Section

In an ideal world, you could simply reject your null or alternative hypotheses according to the significance levels found by the statistics.

That is the main point of your discussion section, but the process is usually a lot more complex than that. It is rarely clear-cut, and you will need to interpret your findings.

For example, one of your graphs may show a distinct trend, but not enough to reach an acceptable significance level.

Remember that no significance is not the same as no difference, and you can begin to explain this in your discussion section.

Whilst your results may not be enough to reject the null hypothesis , they may show a trend that later researchers may wish to explore, perhaps by refining the experiment .

Self-Criticism at the Heart of Writing a Discussion Section

For this purpose, you should criticize the experiment, and be honest about whether your design was good enough. If not, suggest any modifications and improvements that could be made to the design.

Maybe the reason that you did not find a significant correlation is because your sampling was not random , or you did not use sensitive enough equipment.

The discussion section is not always about what you found, but what you did not find, and how you deal with that. Stating that the results are inconclusive is the easy way out, and you must always try to pick out something of value.

Using the Discussion Section to Expand Knowledge

You should always put your findings into the context of the previous research that you found during your literature review . Do your results agree or disagree with previous research?

Do the results of the previous research help you to interpret your own findings? If your results are very different, why? Either you have uncovered something new, or you may have made a major flaw with the design of the experiment .

Finally, after saying all of this, you can make a statement about whether the experiment has contributed to knowledge in the field, or not.

Unless you made so many errors that the results are completely unreliable, you will; certainly have learned something. Try not to be too broad in your generalizations to the wider world - it is a small experiment and is unlikely to change the world.

Once writing the discussion section is complete, you can move onto the next stage, wrapping up the paper with a focused conclusion .

• Psychology 101
• Flags and Countries
• Capitals and Countries

Martyn Shuttleworth (Mar 6, 2009). Writing a Discussion Section. Retrieved Sep 11, 2024 from Explorable.com: https://explorable.com/writing-a-discussion-section

You Are Allowed To Copy The Text

The text in this article is licensed under the Creative Commons-License Attribution 4.0 International (CC BY 4.0) .

This means you're free to copy, share and adapt any parts (or all) of the text in the article, as long as you give appropriate credit and provide a link/reference to this page.

That is it. You don't need our permission to copy the article; just include a link/reference back to this page. You can use it freely (with some kind of link), and we're also okay with people reprinting in publications like books, blogs, newsletters, course-material, papers, wikipedia and presentations (with clear attribution).

Want to stay up to date? Follow us!

Check out the official book.

Learn how to construct, style and format an Academic paper and take your skills to the next level.

(also available as ebook )

Save this course for later

Don't have time for it all now? No problem, save it as a course and come back to it later.

Footer bottom

• Privacy Policy

• Subscribe to our RSS Feed
• Like us on Facebook
• Follow us on Twitter

• How to Order

Research Paper Guide

Research Paper Discussion Section

How To Write A Discussion For A Research Paper | Examples & Tips

People also read

Research Paper Writing - A Step by Step Guide

Research Paper Examples - Free Sample Papers for Different Formats!

Guide to Creating Effective Research Paper Outline

Interesting Research Paper Topics for 2024

Research Proposal Writing - A Step-by-Step Guide

How to Start a Research Paper - 7 Easy Steps

How to Write an Abstract for a Research Paper - A Step by Step Guide

Writing a Literature Review For a Research Paper - A Comprehensive Guide

Qualitative Research - Methods, Types, and Examples

8 Types of Qualitative Research - Overview & Examples

Qualitative vs Quantitative Research - Learning the Basics

200+ Engaging Psychology Research Paper Topics for Students in 2024

Learn How to Write a Hypothesis in a Research Paper: Examples and Tips!

20+ Types of Research With Examples - A Detailed Guide

Understanding Quantitative Research - Types & Data Collection Techniques

230+ Sociology Research Topics & Ideas for Students

How to Cite a Research Paper - A Complete Guide

Excellent History Research Paper Topics- 300+ Ideas

A Guide on Writing the Method Section of a Research Paper - Examples & Tips

How To Write an Introduction Paragraph For a Research Paper: Learn with Examples

Crafting a Winning Research Paper Title: A Complete Guide

Writing a Research Paper Conclusion - Step-by-Step Guide

Writing a Thesis For a Research Paper - A Comprehensive Guide

How To Write The Results Section of A Research Paper | Steps & Examples

Writing a Problem Statement for a Research Paper - A Comprehensive Guide

Finding Sources For a Research Paper: A Complete Guide

A Guide on How to Edit a Research Paper

200+ Ethical Research Paper Topics to Begin With (2024)

300+ Controversial Research Paper Topics & Ideas - 2024 Edition

150+ Argumentative Research Paper Topics For You - 2024

How to Write a Research Methodology for a Research Paper

Ever find yourself stuck when trying to write the discussion part of your research paper? Don't worry, it happens to a lot of people. 

The discussion section is super important in your research paper . It's where you explain what your results mean. But turning all that data into a clear and meaningful story? That's not easy.

Guess what? MyPerfectWords.com has come up with a solution. 

This blog is your guide to writing an outstanding discussion section. We'll guide you step by step with useful tips to make sure your research stands out.

So, let’s get started!

• 1. What Exactly is a Discussion Section in the Research Paper?
• 2. How to Write the Discussion Section of a Research Paper?
• 3. Examples of Good Discussion for a Research Paper
• 4. Mistakes to Avoid in Your Research Paper's Discussion 

What Exactly is a Discussion Section in the Research Paper?

In a research paper, the discussion section is where you explain what your results really mean. It's like answering the questions, "So what?" and "What's the big picture?" 

The discussion section is your chance to help your readers understand why your findings are important and how they fit into the larger context. It's more than just summarizing; it's about making your research understandable and meaningful to others.

Importance of the Discussion Section

The discussion section isn't just a formality; it's the heart of your research paper. This is where your findings transform from data into knowledge. 

Let's break down why it's so crucial:

• Interpretation of Results : The discussion is where you get to tell readers what your results really mean. You go into the details, helping them understand the story behind the numbers or findings.
• Connecting the Dots : You connect different parts of your research, showing how they relate. This helps your readers see the bigger picture.
• Relevance to the Big Picture : You get to highlight why your research matters. How does it contribute to the broader understanding of the topic? This is your time to make your research significant.
• Addressing Limitations : In the discussion, you can acknowledge any limitations in your study and discuss how they might impact your results.
• Suggestions for Further Research : The discussion is where you suggest areas for future exploration. It's like passing the baton to the next researcher, indicating where more work could be done.

Tough Essay Due? Hire Tough Writers!

How to Write the Discussion Section of a Research Paper?

The Discussion section in a research paper plays a vital role in interpreting findings and formulating a conclusion . Given below are the main components of the discussion section:

• Quick Summary: A brief recap of your main findings.
• Interpretation: Significance and meaning of your results in relation to your research question.
• Literature Review : Connecting your findings with previous research or similar studies.
• Limitations: Discussing any study limitations, addressing potential concerns.
• Implications: Broader implications of your findings, considering practical and theoretical aspects.
• Alternative Explanations: Evaluating alternative interpretations, demonstrating a comprehensive analysis.
• Connecting to Hypotheses : Summarizing how your result section aligns or diverges from your initial hypotheses.

Now let’s explore the steps to write an effective discussion section that will effectively communicate the significance of your research:

Step 1: Get Started with a Quick Summary

Start by quickly telling your readers the main things you found in your research. Don't explain them in detail just yet; just give a simple overview. 

This helps your readers get the big picture before diving into the details.

Step 2: Interpret Your Results

In the next step, talk about what your findings really mean. Share why the information you gathered is important. Connect each result to the questions you were trying to answer and the goals you set for your research.

Step 3: Relate to Existing Literature

In this step, link up your discoveries with what other researchers have already figured out. 

Share if your results are similar to or different from what's been found before. This helps give more background to your study and shows you know what other scientists have been up to.

Step 4: Address Limitations Honestly

Every study has its limitations. Acknowledge them openly in your discussion. This not only shows transparency but also helps readers interpret your results more accurately.

Step 5: Discuss the Implications

Explore the implications of your findings. How do they contribute to the field? What real-world applications or changes might they suggest?

Dig into why your discoveries are important. How do they help the subject you studied? 

This step is like looking at the bigger picture and asking, "So, what can we do with this information?"

Paper Due? Why Suffer? That's our Job!

Step 6: Consider Alternative Explanations

After discussing the implications, challenge yourself by exploring alternative explanations for your results. 

Discuss different perspectives and show that you've considered multiple angles.

Step 7: Connect to Your Hypotheses or Research Questions

For the last step, revisit your initial hypotheses or research questions. Explain whether your results support what you thought might happen or if they surprised you. 

Examples of Good Discussion for a Research Paper

Learning from well-crafted discussions can significantly enhance your own writing. Given below are some examples to help you understand how to write your own.

Discussion for a Research Paper Example Pdf

Discussion for a Medical Research Paper

Discussion Section for a Qualitative Research Paper

Mistakes to Avoid in Your Research Paper's Discussion 

Writing the discussion section of your research paper can be tricky. To make sure you're on the right track, be mindful of these common mistakes:

• Overstating or Overinterpreting Results

Avoid making your findings sound more groundbreaking than they are. Stick to what your data actually shows, and don't exaggerate.

• Neglecting Alternative Explanations 

Failing to consider other possible explanations for your results can weaken your discussion. Always explore alternative perspectives to present a well-rounded view.

• Ignoring Limitations 

Don't sweep limitations under the rug. Acknowledge them openly and discuss how they might affect the validity or generalizability of your results.

• Being Overly Technical or Jargon-laden

Remember that your audience may not be experts in your specific field. Avoid using overly technical language or excessive jargon that could alienate your readers.

• Disregarding the 'So What' Factor

Always explain the significance of your findings. Don't leave your readers wondering why your research matters or how it contributes to the broader understanding of the subject.

• Rushing the Conclusion

The conclusion section of your discussion is critical. Don't rush it. Summarize the key points and leave your readers with a strong understanding of the significance of your research.

So, there you have it —writing a discussion and conclusion section isn't easy, but avoiding some common mistakes can make it much smoother. 

Remember to keep it real with your results, think about what else could explain things, and don't forget about any limits in your study.

But if you're feeling stuck, MyPerfectWords.com is here for you. 

Buy research paper now and let our team of experts handle your paper. Whether you need some guidance or want someone to handle the writing for you, we've got your back.

So, don't let discussion writing stress you out. Let our essay writing service for college  make your academic life easier.

Write Essay Within 60 Seconds!

Dr. Barbara is a highly experienced writer and author who holds a Ph.D. degree in public health from an Ivy League school. She has worked in the medical field for many years, conducting extensive research on various health topics. Her writing has been featured in several top-tier publications.

Paper Due? Why Suffer? That’s our Job!

Keep reading

Art 102 - Renaissance to Rococo - Prof. Vitela

• Getting Started
• Find Articles
• Find Images/Websites
• Citation Help

Saint Jerome as Scholar

El Greco, 1610

How to Find Scholarly Articles for ART 102 Research

You'll need to find scholarly research articles to learn more about your topic.  We've suggested some research databases that we recommend to students studying art history. If you scroll down past that, you can learn how to identify a scholarly journal.

If you have any problems finding articles on your topic, please contact the librarians at Cerritos College for help by using the chat button on the right.

Useful Databases

Use the following databases to find articles that are most relevant to your topic.  To access databases from off campus you will need to enter your Cerritos College ID and password.

• Always search databases using only the  keywords  that best describe your topic
• Keywords can be combined into a  search string  with the operators "and", "or", "not"

• Art & Architecture Source This link opens in a new window Full text of more than 720 journals covering topics such as art history, architecture, advertising, archeology, costume design, decorative arts, graphic arts, museum studies, painting, pottery, and sculpture.

• Project Muse This link opens in a new window Provides access to the full-text to more than 180 scholarly and peer-reviewed journal titles in history, literature, philosophy, religion, theater, music and film, among others.

Side by Side Comparison - Scholarly, Popular, Trade

• << Previous: Find Books
• Next: Find Images/Websites >>
• Last Updated: Sep 10, 2024 1:57 PM
• URL: https://libraryguides.cerritos.edu/Art102FA24